Need help with Commercial Refrigerator Repair again? If you prefer to do it yourself and spend a couple bucks on a couple replacement pieces, this may be of assistance to you.
Replacing a standard leaky faucet can be as simple, depending of course on what’s causing the flow. Ordinarily, but the seals inside the unit have worn from use and no more seal well enough. This problem is a simple fix so long as you have the ideal tools ‘ an Allen wrench, a channel lock or vice grip pliers, and a pair of needle nose pliers. A new set of seals, screws, and a metallic ball are found in any local hardware store.
First and foremost it’s very important to shut off both cold and hot water lines before removing the faucet. Start by removing the handle of the unit and exposing a metallic casing inside. To do so, lift the grip all the way up to observe a screw that needs the Allen wrench. Loosen and remove the screw in addition to the handle. The metal housing can be removed too but first use the channel lock/vice grip pliers to twist the foundation of the home to loosen it.
Once that’s been removed you’ll have the ability to access the mechanism which operates the ball and uses the seals. Pull the mechanism out from the stem and you will discover your seals. Typically they’re black rubber/plastic and therefore are rather inexpensive (roughly 5 dollars) in many hardware stores. These seals are exactly what needs to be replaced, Commercial Refrigerator Repair, and the springs include pressure.
Use the needle nosed pliers and pull directly up on the seals to eliminate them. Replace them the exact same way using the pliers to push straight into the slot. If you bought a brand new ball that’s almost always a fantastic idea then which may be replaced with the old one. Be sure to put everything back together that each hole lines up correctly, this is vital. Lubricating the seals and ball Vaseline is a fantastic way to make things work smoother.
Replace the stem mechanism and tighten the bottom of the unit with the vice grip pliers clockwise. Place the grip back to the stem and then twist the Allen wrench. Turn the water lines on and slowly push up the handle to make sure water comes through. Ensure the hot water is warm and the cold is cold (it’s possible to mix up the two with kitchen faucet fixes).
Top Tech Mechanical is a Commercial Restaurant Kitchen Repair Company in Atlanta serving all of the Metro Atlanta area. If you re in need of Restaurant Equipment Repair including refrigerators, freezers, stoves, ovens and more then call us today.